What is the proper way to create a winter underground pool roof to avoid accidents in the colder months of the year? Of course, you may have bought a great set of tablecloths for a basement pool, but what's the next step if you want to do the installation yourself? The following tips and guidelines are a surefire way to get maximum efficiency from a basement pool protection cover.
Simple tips for the proper wintering of underground covering
You can visit this site if you want to buy solar pool covers.
The tips below apply to a variety of winter tablecloths for an indoor pool. Feel free to add a little of your own technique as your product model may require a few additional steps:
The underground cover winter process begins with the normalization of the water chemistry. The value consists of alkalinity, salt storage, unwanted crystal formation, calcium hardness, and pH value.
To retain water for a long time before installing the roof of the underground pool, proper chemical treatment can produce maximum results. Never use a float-shaped oxidizer because it will stick to the surface of the pool.
Throwing chlorine and bromine tablets in a pool because they think they will dissolve on their own is probably one of the worst ideas we can think of. Always dissolve these tablets in a glass or container and pour the contents into your pool.
In winter, the underground surface can experience the tragedy of the expansion of ice. If the protective cover of the basement pond has water pipes, fill only three-quarters of each pipe with water. In severe cases, ice expansion can damage water pipes and cause unnecessary repair costs.
A good strategy is to lower the water level slightly before covering it with the roof of the underground pool. This will prevent water from touching the bottom of the cover sheet. Of course, this is not a hybrid layer, contact causes algae formation and water pollution within weeks.