Explosion-relief consists in eliminating the effect of the explosion (primary pressure) through the ventilation system outside the protected device. This will reduce the pressure in the device to a safe level. If you want to make your workplace safer, then visit https://coopatex.co.uk/ to install explosion protection panels.
There are three main types of help systems in the market i.e. decompression plate, self-closing shock absorbers, and flameless relieving system. The latter can be used indoors due to their special design. Other systems must be used outdoors because of the direct outburst of the explosion wave to the atmosphere.
Here you will find detailed information about all three systems.
1) Decompression plate
The decompression panel is simple but effective explosion protection specially designed for open spaces. For each decompression board installed, a hazard zone boundary must be determined, depending on the specifics of the application, the coverage may vary up to several meters outdoors.
2) The flameless explosion venting system
The flameless explosive ventilation system has a unique design that can be used indoors and in tight installations. The system minimizes the risk of fire after an explosion.
3) Shock absorbers for explosions
The explosion relief damper automatically closes after an explosion to isolate the air supply and prevent a fire after an explosion. This protection is most commonly used in coal dust systems.